The lights are supplied on a sturdy aluminum bracket with a silicone connection cable and can be used and installed immediately.

The BAR and RND strobe lights can generate up to 5000 lumens of light output and are so compact that they must be operated exclusively as strobe lights.

Ensure that flash patterns are short with a duty cycle of only up to approx. 5%, which corresponds to a single flash or, at most, a double flash. When commissioning, always check the heat generated on the bracket and the matching resistor.

Electrical: 12V/3S only, 5A
Beam angle: ~120°
Luminous intensity: ~5000 lumens WHITE (12V)
Dimensions: 18x4 mm
Weight: 1g (without cable)
Chip: 20W Type

Ensure short flash patterns with a duty cycle of only up to approx. 5%, which corresponds to a single flash or a maximum of two flashes. Always check the heat generated on the carrier and the matching resistor during commissioning. Check the operating temperatures after installation. We cannot assume any liability for overheating.

Warning: The LED lights are extremely bright! Never look directly into an LED!