SEAT HEIGHTS: These figures are constructed with a wire mesh "skeleton." This wire can be bent into any position, allowing the shape of the pilot figure to be adjusted. Due to space constraints (with the instrument panel underneath), many cockpits have a lower seat height than the original. With this wire mesh, it is possible to 'bend' the figure at the hips, thereby reducing the seat height.

Each figure has a stuffed cotton body, which, in combination with a wire mesh skeleton, can be positioned in any pose. The standard version of the pilot weighs only approx. 114g, making it one of the lightest full-body pilots on the market.

The figure is available in two different versions:

1. Standard

2. With a servo-controlled rotating head

This option allows the head to turn in the direction of flight. Simply mix the servo with the rudder and/or aileron on a single channel. The servo cable exits the bottom of the figure and can thus be routed directly downward through the bottom of the seat into the fuselage of the aircraft.

Everything is pre-installed—you just need to connect the servo cable.