This full-scale pilot figure is a must-have for any jet. The replicas are intricately detailed and look outstanding. Measuring approximately 38 cm, the figure fits perfectly in 1/4 or 1/4.5 scale aircraft.

Each figure has a cotton-stuffed body, which, combined with a wire mesh skeleton, can be posed in any position. The standard version of the pilot weighs only about 200g, making it one of the lightest full-body pilots on the market.

The figure is available in three different versions:

1. Standard

2. With a rotating head via a servo

3.With a servo-controlled rotating head (using a HITEC HIGH VOLTAGE SERVO)

This option allows the head to turn in the direction of flight. The servo simply needs to be mixed with the rudder and/or aileron on a single channel. The servo cable exits the bottom of the figure and can thus be routed directly downward through the bottom of the seat into the fuselage of the aircraft.

Everything is pre-installed—you just need to connect the servo cable.

Includes:

- 38 cm tall full-body pilot figure

- Detailed and painted head

- HGU-55 jet helmet with visor and removable oxygen mask

- Pilot jumpsuit

- Harness and life jacket

- Black boots