High-quality die-cut vinyl stickers featuring our RCFM logo. The base colors are blue and gold, as shown in the pictures.

Please note that a maximum of 2 stickers can be ordered free of charge per order; for additional stickers, we charge a small fee to cover costs, as the production process is very labor-intensive.

Instructions:

1. Preparation:

- Make sure the surface you want to apply the sticker to is clean and dry. Clean it with a mild detergent if necessary.

2. Apply the transfer sheet:

- Cut a piece of transfer film that is slightly larger than the sticker.

- Carefully place the transfer sheet over the sticker and press it down from the center outward to avoid air bubbles.

3. Press down:

- Use a scraper or credit card to press the transfer sheet firmly. This helps the sticker adhere to the sheet.

4. Peel off the sticker:

- Hold the transfer sheet by one corner and slowly peel it off. The sticker should come off the backing sheet and stick to the transfer sheet. If parts of the sticker remain on the backing sheet, gently press them back down and peel the sheet off again.

5. Position the sticker:

- Hold the transfer sheet with the sticker in place on the surface. Make sure it is straight and properly positioned.

6. Apply the sticker:

- Gently press the sticker onto the surface. Start in the center and work your way outward to avoid air bubbles.

7. Peel off the transfer film:

- Slowly peel off the transfer sheet. If parts of the sticker remain stuck to the sheet, gently press them back down and peel the sheet off again.

8. Finish up:

- Check the sticker for bubbles or wrinkles. If necessary, use the scraper to gently smooth them out.

And that’s it! Your die-cut sticker should now be perfectly positioned on the surface. Have fun designing! If you have any further questions, I’m happy to help.