High-performance light with two 8Wx2 Ultrapower chips, each controlled separately. The two chips can be operated together to double the light output or separately as an extremely powerful beacon. Particularly suitable for large-scale models. The package includes various diffuser caps for universal use:

1x 24mm ROUND
1x 24mm PROFILE

The light is delivered as a fully assembled unit on an aluminum heat sink and is equipped with a thermal fuse. The light is ready for operation on a 2S LiPo (approx. 8V). When operating with 3S (12V), the included resistor must be used; alternatively, you can also use an 8W-3S adapter cable.

Technical Specifications:

• Electrical: 8W reference power, 8(12)V, 0.7A
• Beam angle: >160°
• Luminous intensity: 2x~200 lumens RED
• Luminous intensity: 2x~400 lumens WHITE
• Dimensions: 24x20x20mm
• Weight: 6g (without cable)

Delivery:

Includes a 1m silicone cable and pre-assembled series resistor for 2S and resistor for 3S, plus a profile-shaped extension cap.

Notes:

Specifications regarding reference power are purely comparative values between the offered light sources. They typically refer to an operating voltage of 12V/3S LiPo and depend on the light source, operating mode, and technology.

Please note that high-power LEDs can get very hot; temperatures up to 70°C are quite normal. These lights with heat sink mounting are suitable for continuous operation if air convection is possible. Check the operating temperatures after installation. We cannot assume any liability for overheating.

Warning: The LED lights are extremely bright! Never look directly into an LED!