Addresse
Rosenbergstrsse 17, 8200 Schaffhausen
Besuch nach Vereinbarung
SHOP
Flat headlight with a CNC-machined aluminum reflector (20 mm diameter) and a mounting plate for horizontal cooling. Ideal for landing gear or as a retractable headlight. The included heat sink can be attached to extend operating time. The headlight can also be glued directly to the chassis leg using thermal adhesive; in this case, the mounting flanges can be completely removed, leaving only the reflector.
Direct operation with 2S LiPo (8V); for 3S (12V), the included additional resistor must be soldered in or a 4W adapter cable (accessory) must be used. Please ensure sufficient cooling airflow during operation.
Technical Specifications:
Package contents:
Notes:
Specifications regarding reference power are purely comparative values between the offered light sources. They typically refer to an operating voltage of 12V/3S LiPo and depend on the light source, operating mode, and technology.
Pay attention to the operating temperature; we cannot assume any liability for overheating.
Warning: The LED lights are extremely bright! Never look directly into an LED!
Warning: The LED lights are extremely bright! Never look directly into an LED!
Bitte lesen Sie in der Artikelbeschreibung die Angaben zur Lieferzeit.
Die im Shop oder auf Preislisten angegebenen Lieferfristen oder Angaben über die Verfügbarkeit können sich kurzfristig ändern (z.B. Zwischenverkauf, Verzögerungen im Wareneingang und höherer Gewalt etc.). In diesen Fällen wird der Käufer umgehend informiert. Die Waren werden normalerweise am Folgetag des Bestell- oder Zahlungseingangs dem Transporteur übergeben. Lieferbenachrichtigungen und Liefertermine auf eine gewünschte Zeit sind kostenpflichtig.
Besuch nach Vereinbarung