The high-performance model of the new generation of compact 12mm marker lights with built-in strobe and thermal fuse!

The innovative, forward-angled design ensures optimal forward illumination from the marker light and side illumination from the strobe. Excellent visibility and minimal spill light, just like the originals.

The compact design integrates well even into large-scale models.

Technical Specifications:

• Electrical: 7Wx2 RED/GREEN and 12Wx2 WHITE reference power, 8V/12V
• Current: 0.6A RED/GREEN, 1A WHITE
• Beam angle: 0 to 120° RED/GREEN, 60° to 180° WHITE
• Luminous intensity: ~150 lumens RED
• Luminous flux: ~280 lumens GREEN
• Luminous flux: ~950 lumens WHITE
• Dimensions: 12.5x38x60mm
• Weight: 13g (without cable)

Included:

Includes 1m silicone connection cable, fully assembled with thermal fuse and high-quality polycarbonate cap

Notes:

Specifications regarding reference performance are purely comparative values between the offered light sources. They typically refer to an operating voltage of 12V/3S LiPo and depend on the light source, operating mode, and technology.

Please note that high-power LEDs can get very hot; temperatures up to 70°C are quite normal. These lights with heat sink mounting are suitable for continuous operation if air convection is possible. Check the operating temperatures after installation. We cannot accept any liability for overheating.

Warning: The LED lights are extremely bright! Never look directly into an LED!