Addresse
Rosenbergstrsse 17, 8200 Schaffhausen
Besuch nach Vereinbarung
SHOP
4W spot light with three crystal-clear polycarbonate caps (10 mm and 24 mm). The module is delivered fully wired with an aluminum mounting plate for cooling and installation. A small heat sink for alternative installation with minimal dimensions is also included. Simply
attach the desired cap and heat sink using superglue. The 10mm cap serves as a light diffuser for concealed installation behind a fiberglass wall, while the 24mm cap can be used for surface mounting since it completely covers the module. A polycarbonate profile extension is included as an accessory, which can optionally be attached to the 10mm cap.
Technical Specifications:
Package contents:
Includes a 1m connection cable and a pre-assembled series resistor for 2S and a resistor for 3S.
Notes:
Specifications regarding reference power are purely comparative values between the offered light sources. They typically refer to an operating voltage of 12V/3S LiPo and depend on the light source, operating mode, and technology.
Please note that high-power LEDs can get very hot; temperatures up to 70°C are quite normal. These lights with heat sink mounting are suitable for continuous operation if air convection is possible. Check the operating temperatures after installation. We cannot accept any liability for overheating.
Warning: The LED lights are extremely bright! Never look directly into an LED!
Bitte lesen Sie in der Artikelbeschreibung die Angaben zur Lieferzeit.
Die im Shop oder auf Preislisten angegebenen Lieferfristen oder Angaben über die Verfügbarkeit können sich kurzfristig ändern (z.B. Zwischenverkauf, Verzögerungen im Wareneingang und höherer Gewalt etc.). In diesen Fällen wird der Käufer umgehend informiert. Die Waren werden normalerweise am Folgetag des Bestell- oder Zahlungseingangs dem Transporteur übergeben. Lieferbenachrichtigungen und Liefertermine auf eine gewünschte Zeit sind kostenpflichtig.
Besuch nach Vereinbarung